Jib Booms & Equipment Bridge

Wall-Mounted Jib Booms

Additional information

Conductix-Wampfler jib booms for mounting on an existing facility wall or structural pillar. Flexible usage options include light compressed air or electric tools, welding curtains, etc. either for self-equipping or incl. energy supply system.

Applications:

Any location where a work area needs to be supplied with energy and tools. Standard for hall usage.

Options for mounting the jib booms on existing components

  • Welding surfaces (for jib booms without a wall console) made up of welding plates and an axle support with screws
  • Welding profiles (for jib booms without a wall console) made from a U profile with a welding surface, two consoles, and an axle support with screws.
  • Clamping unit for mounting on support structures (steel or concrete) [only jib booms with a wall console may be used with this type of fixing]

Product data

  • Mounting: wall
  • Swivel range [°]: 180
  • Load-bearing capacity [kg]: 10 – 125
  • Standard boom lengths [m]: 2, 3, 4 , 5
  • Equipment: An optional internal or external energy supply or for self-equipping may be included based on the boom type and customer needs.

Downloads

Jib boom
Jib boom

Maintenance instructions

  • Download
  • Recommend
  • Add to cart



Column-Mounted Jib Booms

Additional information

Conductix-Wampfler jib booms for mounting on either an existing column or a Conductix-Wampfler stand-alone column. The possible applications for column-mounted jib booms are the same as those for wall-mounted jib booms. Column-mounted jib booms can be mounted anywhere on solid floor or foundation surfaces. The corresponding tie rod sets or foundation jigs for this are not included, but can be ordered as separate items.

Applications

Any location where a work area needs to be supplied with energy and tools Standard for hall usage.

Accessories

  • Tie rod set
  • Foundation jig
  • Swivel range lock

Product data

  • Mounting: column
  • Swivel range [°]: 180
  • Load-bearing capacity [kg]: 10 – 125
  • Standard boom lengths [m]: 2, 3, 4, 5
  • Standard column heights [m]: 3, 4
  • Equipment: an optional internal or external energy supply or for self-equipping may be included based on the boom type and customer needs.

Downloads

Jib boom
Jib boom

Maintenance instructions

  • Download
  • Recommend
  • Add to cart


Schwenkarm / Jib Arm
Schwenkarm / Jib Arm

Montagevorschrift / Installation Instruction

  • Download
  • Recommend
  • Add to cart



Equipment Bridges / Tool Bridges

Additional information

Conductix-Wampfler device bridges can be used to provide optimum coverage for large work areas. Various models are available in different sizes based on customer specifications. The energy supply is available with electric supply only, compressed air only or a combination of the two. The simple handling of the system is another benefit.

Energy supply options for the equipment carrier

  • Compressed air
  • Electric
  • Compressed air and electric

Energy supply options for the tool transporter

  • Compressed air
  • Electric
  • Compressed air and electric

Energy supply options for turntables

  • Compressed air
  • Electric
  • Compressed air and electric

Product data

Versions

  • Single girder device bridge with a equipment carrier
  • Single girder device bridge with a tool transporter
  • Double girder device bridge with a turntable
  • Double girder device bridge with a tool transporter

Downloads

Switching bridge Program 0430
Switching bridge Program 0430

Installation and operating manual

  • Download
  • Recommend
  • Add to cart